Home/Electrician/Guides/Cooker Point Fitting — UK Cost & Part P Guide

Install a cooker point.

Part P notifiable

Dedicated 32A circuit and outlet for your electric range — Part P-notifiable work by a registered electrician.

Where is the job?
✓ Updated May 2026✓ Free quotes✓ Vetted pros
20,000+UK homeowners
50,000Quotes sent
Keep going

Hire an electrician. Without the rewire surprise.

From a single dodgy socket to a full rewire — read the brief, then let Three local electricians quote.

Instant
01 · Ask

Spot the warning signs

Buzzing fuse box, hot sockets, lights flickering when you boil the kettle. Describe it in plain English — the AI tells you if it's a 30-min fix or a rewire.

Free
02 · Read the brief

Walk in informed

Part P, EIC vs EICR, C1/C2/C3 ratings, when Building Control gets involved. Know the lingo before the quote arrives.

60 seconds
03 · Compare

Compare 3 electrician quotes

Up to Three local electricians come back with itemised quotes — call-out, materials, labour, certificate fee. No flat-rate guesses.

Ready when you are

Enter your postcode and get free quotes from local pros.

Get electrician quotes
Top tips

Hiring a electrician, without the regret.

Four moves that separate a smooth job from a nightmare.

Check NICEIC or NAPIT registration.

Part P electrical work must be certified by a registered electrician. NICEIC and NAPIT are the two big ones — verify online before they start.

Demand the EIC certificate.

Any new circuit or consumer unit change needs an Electrical Installation Certificate (EIC). Without it, you can't sell the house cleanly.

Get the EICR before buying.

An Electrical Installation Condition Report on a house you're buying flags hidden rewire jobs. A C1 or C2 finding is a £2k–£8k negotiation lever.

Don't accept a quote without a survey.

Honest electricians lift a few floorboards before quoting a rewire. Anyone quoting a flat rate over the phone is guessing.

Costs & timeline

Know what it costs. Know when it ends.

Indicative UK ranges and what affects price.

Cost range

By job type

Inc. VAT · 2026
Source: NMT quotes
Hourly call-out rate
£50–£100/hr
Day rate
£250–£450/day
New socket or light fitting
£80–£200
Consumer unit upgradeInc. RCDs + cert
£600–£1.5k
EICR full report3-bed house
£150–£400
Full house rewire3-bed, plaster making-good extra
£3.5k–£8.5k
!

Quote spread is typically ± 18% — always get 3 quotes.

At a glance

The Electrician briefing.

Infographic · Video
Infographic

Electrician quick-view

Cooker Point Fitting — UK Cost & Part P Guide infographic
Video guide

Electrician explained

A cooker point is a 32A switched circuit and outlet for electric cookers and ranges. It's Part P notifiable — must be installed by a registered electrician or certified by Building Control.

What's involved

  • Survey existing consumer unit capacity
  • Run new 6mm² circuit on a 32A MCB / RCBO
  • Install cooker switch and outlet plate
  • Test, certify and notify Building Control

Typical UK costs (2026)

ItemCost
Standard fit (existing consumer unit)£280–£450
With consumer unit upgrade£700–£1,100
Outlet relocation only (existing circuit)£120–£220

What to check

Existing consumer unit must have a spare RCD-protected way. Total cooker + hob + oven load determines whether a single 32A or twin 32A circuit is needed. Always insist on a Part P certificate and Building Control notification number.

This guide was written with AI assistance and is intended for general information only. Prices are estimates based on UK averages and may vary by region. Always get at least three quotes and consult a qualified professional before starting any work.

NEWAI Trade Assistant

Got more questions
about electrician?

Ask follow-ups in plain English. The AI explains options, sequencing and what to ask the electrician — so you walk in informed.

I'm planning a job. Should I be looking for an electrician?
Sounds like a job for electrician. Tell me what you're trying to do — I'll walk you through costs, timeline and what to ask before they start.
FREE QUOTES60 SECONDS